Edimax EW-7228APn driver and firmware
Related Edimax EW-7228APn Manual Pages
Download the free PDF manual for Edimax EW-7228APn and other Edimax manuals at ManualOwl.com
Datasheet - Page 2
... can be setup: • Connect the EW‐7228APn to ADSL modem, router, or switch/hub in your network through the LAN port of the
access point by Ethernet cable. • Connect a computer to the LAN port and setup the Internet connection by running the multi‐language setup wizard. • Share the Internet connection by connecting a LAN cable to other computers or wireless devices.
Quick Install Guide - Page 6
....168.2.1 in the address box. In the pop up window, enter the following username and password: Username: admin Password: 1234 Click "Log In".
11. This will open the access point's web management interface, which allows you to configure the functions and settings of the access point. Please refer to the user manual for more information about...
Quick Install Guide - Page 8
... Wi-Fi router. The "MAIN ESSID" is the SSID of the repeater. Click the box labeled "MAIN ESSID" and enter a name for reference. In the example below we used the name "repeater". Different SSIDs ensure that you can easily differentiate between devices. Click on "Apply".
3. You will see a screen which displays "Save settings successfully...
Quick Install Guide - Page 12
... from the list. In this case, the network was named "repeater".
The access point should now be fully operational. The "Wi-Fi" status should display "Connected". Verify your connection by opening a web browser in an appropriate location.
Note: Please refer to the attached Quick Installation Guide for guidance on Access Point mode, AP Client...
Manual - Page 2
... you have purchased and the setup screen may appear slightly different from those shown in this QIG. For more information about this product, please refer to the user manual on the CD-ROM. The software and specifications are subject to change without notice. Please visit our website www.edimax.com for updates. All brand and product...
Manual - Page 3
...-5-3. WEP...53
III-5-4. WPA Pre-Shared Key 55
III-5-5. WPA Radius ...56
III-6.
MAC Filtering ...57
III-7.
System Utility ...59
III-7-1.Password Settings ...59
III-7-2. Management IP...60
III-7-3. DHCP Server...61
III-8.
Configuration Tool...63
III-9.
Upgrade ...64
III-10.
Reset ...65
IV. APPENDIX ...68
IV-1.
Configuring your IP address 68
IV-1-1. Windows XP ...68
3
Manual - Page 4
IV-1-2. Windows Vista ...70
IV-1-3. Windows 7 ...71
IV-1-4. Mac OS ...75
IV-2. How to Find your Network Security Key 78
IV-2-1. Windows 7 & Windows Vista 78
IV-2-2. Mac ...80
IV-3.
Troubleshooting ...83
IV-4.
Glossary ...85
IV-5.
Technical Support...88
4
Manual - Page 5
... the Edimax EW-7228APn wireless access point. This product provides wireless access to an existing wired Ethernet network, at speeds up to 150Mbps for 802.11n compatible wireless devices. Its quick and easy installation process ensures that anybody can set up a network environment and share an Internet connection in a matter of minutes.
I-1.
Package Contents
Before you start using this router...
Manual - Page 9
I-4. System Requirements - Computer (with Fast Ethernet adapter or wireless adapter) running
Windows98/2000/XP/Vista/7, Mac OS. - Web Browser for software configuration (Internet Explorer 7 or above,
Google Chrome, Firefox, Safari)
9
Manual - Page 10
... an Ethernet cable to the Ethernet port on your computer. Connect the other end to an Ethernet port on the access point.
2. Plug the power adapter into the device's 5V power port, and plug the adapter into a wall socket. The PWR LED should light up.
Refer to the following instructions appropriate for your operating system.
II-1.
Mac
MAC USERS: You may need to modify the IP address...
Manual - Page 14
II-2.
Windows
1. Windows users can run the setup wizard on the included CD. Insert the Edimax CD into your computer's CD drive. When the AutoPlay screen appears, select "Run Autorun.exe."
Note: If a popup window appears asking "Do you want to allow the following program to make changes to this computer", please click "Yes" to continue.
2. Click on "Setup Utility...
Manual - Page 15
... successfully found the device, click "Next" to continue.
4. The setup wizard will prompt you for a password. Enter the default password, 1234.
5. The setup wizard will then show the access point's IP information. The default IP is 192.168.2.1. Click "Next" to continue. Note: Please do not select "Automatically assign an IP address from your network" unless you...
Manual - Page 26
... router or xDSL modem. You can now connect a computer or other network device to the access point wirelessly by locating and connecting to its SSID. Or you can connect a computer/device to the access point using an Ethernet cable.
AP Client Mode Connect one port of the access point to the network device you wish to connect to the Internet wirelessly, e.g. a games console or smart TV...
Manual - Page 29
You will then be prompted to enter the device's username and password. The default username is admin and the default password is 1234.
Windows:
Mac:
From here, you will see the browser based configuration interface home screen.
29
Manual - Page 31
... the left side, there is a drop down menu to change the language of the browser based configuration interface.
The "Status and Information" screen is displayed in the main window. This shows basic system information about the access point for reference, such as firmware version, wireless mode and SSID, and the access point's IP and MAC address.
31
Manual - Page 32
... Code Version Wireless Configuration Mode ESSID Channel Number
Displays the total time the access point has been operational since it was last powered on. Displays hardware version. This information is helpful if you experience problems with your access point and need technical support. Displays current firmware version. This information is useful when performing a firmware upgrade.
Displays the...
Manual - Page 36
... Mode
In Station-Infrastructure mode, the device acts as a wireless client and can be connected to Ethernet-only Internet devices, such as smart televisions or video game consoles. This gives these devices the capability to connect to the Internet wirelessly.
Band
Please select the wireless band you wish to use. By selecting different band settings, you'll be able to allow...
Manual - Page 39
... access points using the wireless band you select (802.11b, 802.11n, or 802.11g) will be able to connect to this device.
If you select 2.4GHz (B+G), then only access points using the 802.11b and 802.11g bands will be able to connect to this device.
Channel Number
MAC address 1
Set Security
If you want...
Manual - Page 64
Reset/WPS button for 10 seconds, until the Power LED ( ) goes out. The Reset/WPS button is located on the front panel of the device.
III-9.
Upgrade
The access point's upgrade feature allows you to update the system firmware to a more recent version. You can download the latest firmware from the Edimax website.
Selecting "Upgrade" from the menu on the left side...
Manual - Page 84
... password. The access point is extremely hot.
filter, try to connect the access point to another computer. e. Set your computer to obtain an IP address automatically (DHCP), and see if your computer can obtain an IP address. f. If you are experiencing problems after a firmware upgrade, please contact your dealer of purchase for help. a. Check if "Broadcast ESSID" (in the "Wireless...