Netgear GSM5212P driver and firmware
Related Netgear GSM5212P Manual Pages
Download the free PDF manual for Netgear GSM5212P and other Netgear manuals at ManualOwl.com
GSM5212P/GSM7212P/GSM7212F/GSM7224P Administration Manual - Page 2
..., get the latest product updates, or get support online, visit us at http://support.netgear.com.
Phone (US & Canada only): 1-888-NETGEAR Phone (Other Countries): See Support information card.
Trademarks
NETGEAR, the NETGEAR logo, ReadyNAS, ProSafe, Smart Wizard, Auto Uplink, X-RAID2, and NeoTV are trademarks or registered trademarks of NETGEAR, Inc. Microsoft, Windows, Windows NT, and Vista are...
GSM5212P/GSM7212P/GSM7212F/GSM7224P Administration Manual - Page 322
... have a Hardware Installation Guide that includes additional information about rack mounting and switch stack cabling.
1. Install the switches in a rack. 2. Install all stacking cables, including the redundant stack link. It is highly recommended that a
redundant link be installed. 3. Identify the switch to be the master. Power up this switch first. 4. Monitor the console port. Allow this switch...
GSM5212P/GSM7212P/GSM7212F/GSM7224P Administration Manual - Page 323
... up and the show switch command shows a code mismatch error. 1. NETGEAR recommends that you schedule the firmware upgrade when there is no
excessive network traffic (such as a broadcast event). 2. Download new firmware using TFTP or xmodem to the master switch using the copy
command. Once the firmware is successfully loaded on the master switch, it automatically propagates to the other...
GSM5212P/GSM7212P/GSM7212F/GSM7224P Administration Manual - Page 331
... their stacking ports. 3. Power on the switches.
Replace a Stack Member
1. Make sure the redundant stack connection is in place and functional. All stack members should be connected in a logical ring.
2. Power down the switch to be removed and disconnect its stack cables. 3. Remove the switch from the rack. 4. If you will be installing a different model...
GSM5212P/GSM7212P/GSM7212F/GSM7224P Administration Manual - Page 332
... stack should not change).
8. If the code version of the newly added member is not the same as the existing stack, update the code as described in Upgrade the Firmware on page 323.
Switch Stack Configuration Files
The configuration files record settings for all global and interface-specific settings that define the operation of the stack and...
GSM5212P/GSM7212P/GSM7212F/GSM7224P Administration Manual - Page 518
... Tree protocol 376 stack members, renumbering 334 stacking
moving a master to a different stack 336 stacking ports, Ethernet configuration 324 stacks
adding switches to 330 code mismatch 323 compatible switch models 321 firmware 322 installation 322 removing switches from 331
upgrading firmware 323, 324 stacks, 10G fiber 327, 328, 329 static binding 279, 280
static host name...
GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 2
..., get the latest product updates, or get support online, visit us at http://support.netgear.com.
Phone (US & Canada only): 1-888-NETGEAR Phone (Other Countries): See Support information card.
Trademarks
NETGEAR, the NETGEAR logo, ReadyNAS, ProSafe, Smart Wizard, Auto Uplink, X-RAID2, and NeoTV are trademarks or registered trademarks of NETGEAR, Inc. Microsoft, Windows, Windows NT, and Vista are...
GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 13
... interfaces are logical point-to-point links that carry encapsulated packets.
CPU ports are handled by the driver as one or more physical entities located on physical slots.
Note... on your switch depend on the installed modules. Additionally, for some show commands, the output fields might change based on the modules included in the software. The software suite includes the following modules: &#...
GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 34
... becomes the manager. This might be decided by a MAC address comparison. If the administrator wants a particular version to be used by the stack, he should first ensure that this particular unit becomes stack manager.
• Bootcode Upgrades
Bootcode upgrades are not initiated by the stack firmware synchronization.
boot auto-copy-sw
This command enables or disables stack...
GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 408
... (software restart) and 2 (software reload/upgrade) are considered planned restarts. Reasons 0 (unknown) and 3 (switch to redundant control processor) are... restarting router is unable to react to topology changes. In particular, the restarting router will not immediately update its ... one supported, this parameter is optional.
A helpful neighbor considers a link down with the restarting router to be...
GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 502
... configuration of other devices in the network, including a DHCP or BOOTP server, a TFTP server and, if necessary, a DNS server.
There are three steps to Auto Install:
1. Configuration or assignment of an IP address for the device.
2. Assignment of a TFTP server.
3. Obtain a configuration file for the device from the TFTP server.
show autoinstall
This command displays the current...
GSM5212P/GSM7212P/GSM7212F/GSM7224P Hardware Installation Guide - Page 2
... and software upgrades.
NETGEAR, Inc.
350 East Plumeria Drive San Jose, CA 95134 USA E-mail: support@netgear.com Website: http://www.netgear.com Phone: 1-888-NETGEAR, for US & Canada only. For other countries, see your Support information card.
Trademarks
NETGEAR, the NETGEAR logo, ProSafe, Smart Wizard, and Auto Uplink are trademarks or registered trademarks of NETGEAR, Inc. Microsoft, Windows...
GSM5212P/GSM7212P/GSM7212F/GSM7224P Hardware Installation Guide - Page 18
... the Resource CD to install the USB driver on your PC. b. Select the DB9 (cable not included) in the back as console port by pushing the slide switch to the right.
3. Connect the other end of the cable to a workstation or terminal. 4. If you attached a workstation, start a terminal-emulation program.
• Microsoft Windows users can use HyperTerminal...
GSM5212P/GSM7212P/GSM7212F/GSM7224P Hardware Installation Guide - Page 21
... Adapter Cards
Make sure that the network adapter cards installed in the PCs are in working condition and the software driver has been installed. • Configuration: If problems occur after you change the network configuration, restore the original connections. Then find the problem by making the changes, one step at a time. Make sure that cable distances, repeater limits, and other physical...
GSM5212P/GSM7212P/GSM7212F/GSM7224P Installation Guide - Page 1
... Hardware Installation Guide.
Note: If AC power is not available, the GSM5212P can get power from power sourcing equipment (PSE). Just connect port 1 of the switch to a PSE switch. GSM7224P and GSM7212P are PSE switches. For more information, see the Hardware Installation Manual.
3. Connect devices to the switch. • Use Category 5e (Cat5e) for copper ports at 1000 Mbps. • Use NETGEAR...
GSM5212P/GSM7212P/GSM7212F/GSM7224P Installation Guide - Page 2
... both the CLI Reference Manual for your switch and the Software Administration Guide.
PC in DHCP Client Mode with DHCP Server
By default, the switch is configured as a DHCP client to obtain its IP address from a DHCP server in the connected network. You need to access the switch from the serial console port. 1. Make sure that the...
GSM5212P/GSM7212P/GSM7212F/GSM7224P Setup Manual - Page 2
... timely notices of product and software upgrades. Email: support@netgear.com Website: http://www.netgear.com Phone: 1-888-NETGEAR, for US & Canada only. For other countries, see your Support information card.
Trademarks
NETGEAR, the NETGEAR logo, ProSafe, Smart Wizard, and Auto Uplink are trademarks or registered trademarks of NETGEAR, Inc. Microsoft, Windows, Windows NT, and Vista are registered...
GSM5212P/GSM7212P/GSM7212F/GSM7224P Setup Manual - Page 3
... Connectivity 7
Starting the Switch 8 Initial Configuration 9
Initial Configuration with the Easy Setup Wizard 9 Software Installation 10
Quick-Starting the Networking Device 10 System Information and System Setup 10 Using Ezconfig for Switch Setup 13 Changing the Password 13 Setting Up the Switch IP Address 14 Assigning a Switch Name and Location Information 14 Saving the Configuration...
GSM5212P/GSM7212P/GSM7212F/GSM7224P Setup Manual - Page 10
...recent firmware.
Quick-Starting the Networking Device
1. Configure the switch for in-band or out-of-band connectivity. In-band connectivity allows access to the software locally or from a remote workstation. You must configure the device with IP information (IP address, subnet mask, and default gateway).
2. Turn the power on. 3. Allow the device to load the software until the login prompt displays...
GSM5212P/GSM7212P/GSM7212F/GSM7224P User Manual - Page 345
...upgrade the operational flash: • Image1 - Specify the code image1 you want to download. • Image2 - Specify the code image2 you want to download.
• CLI Banner - Specify CLI Banner when you want a banner to be displayed before the login prompt.
• Configuration - Specify configuration when you want to update... PEM File to specify SSH-2 Digital Signature Algorithm (DSA)
Key File...