Samsung ML-3712ND driver and firmware
Related Samsung ML-3712ND Manual Pages
Download the free PDF manual for Samsung ML-3712ND and other Samsung manuals at ManualOwl.com
User Manual (user Manual) (ver.1.02) (English) - Page 8
... this
manual and troubleshoot accordingly (see "Clearing paper jams" on page 68).
Printouts are blurry.
• The toner level might be low or uneven. Shake the toner cartridge.
• Try a different print resolution setting. • Replace the toner cartridge.
Where can I download the machine's driver?
• Visit www.samsung.com/printer to download the latest machine's driver, and install...
User Manual (user Manual) (ver.1.02) (English) - Page 23
... that the machine is connected to your computer and powered on.
4 Read License Agreement, and select I accept the terms of the License Agreement. Then, click Next.
5 Follow the instructions in the installation window.
If the "Found New Hardware Wizard" appears during the installation procedure, click Cancel to close the window.
2 Insert the supplied software CD into your CD-ROM drive.
User Manual (user Manual) (ver.1.02) (English) - Page 24
... to reinstall the driver.
16
Windows
1 Make sure that the machine is connected to your computer and powered on.
2 From the Start menu, select Programs or All Programs > Samsung Printers > your printer driver name > Uninstall.
3 Follow the instructions in the installation window. 4 Insert the software CD into your CD-ROM drive and install the
driver again (see "Installing the driver locally" on...
User Manual (user Manual) (ver.1.02) (English) - Page 105
...
1. Software installation
5 Installation for Macintosh 7 Reinstallation for Macintosh 8 Installation for Linux 10 Reinstallation for Linux
2. Using a network-connected machine
12 Useful network programs 13 Wired network setup 17 Installing driver over the network 24 IPv6 configuration 27 Wireless network setup
3. Useful setting menus
56 Information 57 Layout 58 Paper 59 Graphic 60 System setup...
User Manual (user Manual) (ver.1.02) (English) - Page 107
...chapter provides instructions for installing essential and helpful software for use in an environment where the machine is connected via a cable. A locally connected machine is a machine directly attached to your computer using the cable. If your machine is attached to a network, skip the following steps below and go on to installing a network connected machine's driver (see Installing driver over...
User Manual (user Manual) (ver.1.02) (English) - Page 111
... for Linux
1. Software installation 8
You need to download Linux software packages from the Samsung website to install the printer software (http://www.samsung.com/ printer).
1
Installing the Unified Linux Driver
1 Make sure that the machine is connected to your computer and powered on.
6 When the welcome screen appears, click Next.
7 When the installation is complete, click Finish.
The...
User Manual (user Manual) (ver.1.02) (English) - Page 112
... your computer and powered on.
2 When the Administrator Login window appears, type "root" in the Login field and enter the system password.
You must log in as a super user (root) to install the machine software. If you are not a super user, ask your system administrator.
3 From the Samsung website, download the Printer Settings Utility package to your computer.
4 Right-click the Printer Settings...
User Manual (user Manual) (ver.1.02) (English) - Page 113
... (root) to uninstall the printer driver. If you are not a super user, ask your system administrator.
3 Click the icon at the bottom of the desktop. When the Terminal screen appears, type in the following. [root@localhost root]#cd /opt/Samsung/mfp/uninstall/ [root@localhost uninstall]#./uninstall.sh
4 Click Uninstall. 5 Click Next. 6 Click Finish.
1. Software installation 10
User Manual (user Manual) (ver.1.02) (English) - Page 116
... to use it on your network. You can use network after connecting network cable to a corresponding port on your machine. • For models that do not have the display screen on the control
panel, use the SyncThru™ Web Service or SetIP program. - See "Using SyncThru™ Web Service" on page 93. - See "Setting IP address" on page 13. • For...
User Manual (user Manual) (ver.1.02) (English) - Page 120
...to the network and powered on. Also, your machine's IP address should have been set (see "Setting IP address" on page 13).
If the "Found New Hardware Wizard" appears during the installation procedure, click Cancel to close the window.
2 Insert the supplied software CD into your CD-ROM drive.
The software CD should automatically run and an installation window will appear.
3 Select Install Now.
When...
User Manual (user Manual) (ver.1.02) (English) - Page 121
...click OK.
If the driver searched only one machine, the confirmation window appears.
6 Follow the instructions in the installation window.
7
Macintosh
1 Make sure that the machine is connected to your network and powered on. Also, your machine's IP address should have been set (see "Setting IP address" on page 13).
2 Insert the supplied software CD into your CD-ROM drive. 3 Double-click the CD...
User Manual (user Manual) (ver.1.02) (English) - Page 123
... to install the printer software (http://www.samsung.com/ printer).
To install other software: • See "Installing the Smart Panel" on page 8. • See "Installing the Printer Settings Utility" on page 9.
Install the Linux driver and add network printer
1 Make sure that the machine is connected to your network and powered on. Also, your machine's IP address should have been set.
2 Download...
User Manual (user Manual) (ver.1.02) (English) - Page 124
....
Make sure your machine supports the UNIX operating system before installing the UNIX printer driver (see basic guide)
To use the UNIX printer driver, you have to install the UNIX printer driver package first, then setup the printer. You can download the UNIX printer driver package from the Samsung website.
Installing the UNIX printer driver package
The installation procedure is common for all...
User Manual (user Manual) (ver.1.02) (English) - Page 131
... a wireless network in Printer Settings Utility with a USB cable after installing the driver (Windows and Macintosh operating systems are supported).
• With a network cable: You can set up a wireless network using the SyncThru™ Web Service program (see "Using a network cable" on page 48).
15
Using the WPS button
If your machine and an access point (or wireless router) support WiFi...
User Manual (user Manual) (ver.1.02) (English) - Page 135
... point (or wireless router) was installed. If you do not know about your wireless environment, please ask the person who set up your network.
After completing the wireless network connection, you need to install a machine driver to print from an application (see "Installing driver over the network" on page 17).
1 Press the (Menu) button on the control panel. 2 Press Network > OK > Wireless > OK...
User Manual (user Manual) (ver.1.02) (English) - Page 137
... > Samsung Printers > your printer driver name > Wireless Setting Program.
Access point via USB cable
► Items to prepare • Access point • Network-connected computer • Software CD that was provided with your machine • The machine installed with a wireless network interface • USB cable
► Creating the infrastructure network
1 Check whether the USB cable is...
User Manual (user Manual) (ver.1.02) (English) - Page 138
Wireless network setup
3 Insert the supplied software CD into your CD-ROM drive. 4 Select the Wireless Setting and Installation option.
2. Using a network-connected machine 35
If the search has failed, you may check if the USB cable is properly connected between the computer and machine, and follow the instructions on the window.
7 After searching, the window shows the wireless network devices. ...
User Manual (user Manual) (ver.1.02) (English) - Page 152
.... The MAC address is the hardware serial number of the network interface and can be found in the Network Configuration Report.
See "Setting IP address" on page 13.
Items to prepare
• Access point • Network-connected computer • Software CD that was provided with your machine • The machine installed with a wireless network interface • Network cable
Configuring the...
User Manual (user Manual) (ver.1.02) (English) - Page 224
.... The English alphabet and numbers are displayed normally on the cover page.
When printing a document in Macintosh with Acrobat Reader 6.0 or higher, colors print incorrectly.
Make sure that the resolution setting in your machine driver matches the one in Acrobat Reader.
Refer to the Macintosh User's Guide that came with your computer for further information on Macintosh error messages.
User Manual (user Manual) (ver.1.02) (English) - Page 226
... page or install more memory.
A PostScript error page prints.
The print job may not be PostScript.
Make sure that the print job is a PostScript job. Check to see whether the software application expected a setup or PostScript header file to be sent to the machine.
The optional tray is not selected in the driver.
The printer driver has not...