Sony FCBIX11A driver and firmware
Related Sony FCBIX11A Manual Pages
Download the free PDF manual for Sony FCBIX11A and other Sony manuals at ManualOwl.com
User Manual (FCB-IX11a_tech_manual) - Page 5
... Commands; the display and other features are turned off.
• I/F clear Clears the Command buffer of the FCB series camera. Clearing the buffer can also be carried out from the control application software when the power is on.
• Address set VISCA is a protocol, which normally can support a daisy chain of up to seven attached devices. Whenever a camera is connected...
User Manual (FCB-IX11a_tech_manual) - Page 7
...which can be set using VISCA Commands.
• Auto White Balance This mode computes the white ...camera. One Push White Balance data is lost when the power is turned off. If the power is turned off, reset the One Push White Balance.
• Manual WB Manual control... set, the speed can be 1/30, 1/15, 1/8, or 1/4 s. The picture output is read at a normal rate from the memory. The memory is updated ...
User Manual (FCB-IX11a_tech_manual) - Page 20
...The devices on the network are assigned addresses. The address of the controller is fixed at 0. The addresses of the peripheral devices are 1, 2, 3 ... in order, starting from the one nearest the conttoller. The address of the peripheral device is set by sending address commands during the initialization of the network.
...1)VISCA is a protocol which controls consumer camcorders developed by Sony...
User Manual (FCB-IX11a_tech_manual) - Page 45
...
Use of the demonstration software developed by Sony Corporation or use of the software with customer developed application software may damage hardware, the application program or the camera. Sony Corporation is not liable for any damages under these conditions.
Operation
Start the camera control software on your computer after you turn on the camera and the image is displayed.
Other
Do not...