Acer AT110 F2 driver and firmware
Drivers and firmware downloads for this Acer Computers item
Related Acer AT110 F2 Manual Pages
Download the free PDF manual for Acer AT110 F2 and other Acer manuals at ManualOwl.com
Acer AT110 F2 Service Guide - Page 2
... the updates made on Acer AT110 F2 service guide.
Date
Chapter
Updates
Copyright
Copyright © 2009 by Acer Incorporated. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or...
Acer AT110 F2 Service Guide - Page 3
... used in this manual : Screen messages NOTE Denotes actual messages that appear on screen. Gives bits and pieces of additional information related to the current topic. Alerts you to any damage that might result from doing or not doing specific actions. Gives precautionary measures to avoid possible hardware or software problems. Reminds...
Acer AT110 F2 Service Guide - Page 4
... electrostatic discharge
To prevent damaging the system, be aware of the precautions you need to follow when setting up the system or handling parts. A discharge of static electricity from a finger or other conductor may damage system boards or other static-sensitive devices. This type of damage may reduce the life expectancy of the...
Acer AT110 F2 Service Guide - Page 6
...Hard Disk Drive Installation / Removal Power supply installation / Removal Install a hot-swap power supply module
25
26 26 27 28 29 30 30 31 32 32
CABLE ROUTING
Cable Routing image
33
33
BIOS SETUP
Main Menu Advanced Menu Processor Configuration Memory Configuration Advanced Chipset Configuration ACPI Configuration SATA Controller Configuration PCI Configuration USB Configuration Legacy Device...
Acer AT110 F2 Service Guide - Page 14
... port, Six USB Ports, VGA Port, LAN Port Internal-One USB port for tape device, one Type A USB port, TPM , Six SATA ports Front panel- Power, Hard drive, and LAN activity Rear panel-Activity & Link status for the LAN ports One Systems Fan One Processor Heat Sink Fan
Core Logic Chipset LAN Controller Memory Controller Storage Controller VGA Controller...
Acer AT110 F2 Service Guide - Page 18
Power supply specification
AT110 F2 supports 300-watts and 450W power supply modules. You have the option to install a 300-watts power supply module or 450W power supply module. Note: If you need to install three hard disk drives, please use 300W power supply (with three connectors). If you need to install four hard disk drives, please use 450W power supply (with four connectors).
Item Model Type...
Acer AT110 F2 Service Guide - Page 29
Installing/Removing System Hardware
This chapter contains step-by-step procedures on how to disassemble the server system for maintenance and troubleshooting. To disassemble the Acer AT110 F2 Server, please pay attention to each section's instruction and tools needed.
NOTE: The screws for the different components vary in size. During the disassembly process, group the screws...
Acer AT110 F2 Service Guide - Page 30
Chassis Cover Removal and Installation
Removing the side cover
1. 2. Remove the two screws located on the rear edge of the side panel. Press the side panel release button and slide the side panel toward the rear of the chassis to disengage it.
Removing the tower foot
1. 2. Release the bezel door retention tabs from the chassis interior. Pull the bezel away from the chassis.
26
Acer AT110 F2 Service Guide - Page 31
CPU Installation / Removal
The mainboard supports one C32 processor socket with Dual/Four/Six-Core AMD Opteron™ 4100 series. You have the option to upgrade the default processor. Observe the following guidelines when replacing a processor.
• •
Before removing a processor, make sure to back up all important system files. Handle the processor and the HSF assembly carefully. Damage...
Acer AT110 F2 Service Guide - Page 32
Cooling Fan Installation / Removal
1. 2. 3. 4. Disconnect the processor cooling fan cable from mainboard. Use a long-nosed screwdriver to loosen the four cooling fan mounting pins. Lift the cooling fan away from the mainboard. Lay down the cooling fan in an upright position - with the thermal patch facing upward. Do not let the thermal patch touch the work surface.
28
Acer AT110 F2 Service Guide - Page 33
Memory Installation / Removal
The motherboard supports DDR3 memory modules, whereby BIOS will automatically detect memory capacity and specifications. Memory modules are designed so that they can be inserted only in one direction. The memory capacity used can differ with each slot. Installation step: 1. Insert the DIMM memory module vertically into the DIMM slot, and push it down. 2. Close the ...
Acer AT110 F2 Service Guide - Page 34
PCI Expansion Card Installation / Removal
Acer AT110 F2 has four bus slots with of three separate bus segments:
PCIE1 -- PCI Express x16 slots PCIE2 -- PCI Express x8 slot PCIE3 -- PCI Express x4 slot PCIE4 -- PCI 32/33MHz slot
Install the expansion card
1. 2. Press the release latch of the slot cover opposite the selected expansion slot. Pull out the slot cover and store it for reassembly...
Acer AT110 F2 Service Guide - Page 35
Hard Disk Drive Installation / Removal
Below is the instruction of HDD installation and removal SOP. 1. Open the side cover.
2. 3. 4. 5.
Note!! Place.
Press the release button and pull the blank out of the drive bay. Slide hard disk into blank. Make sure the HDD is seated securely in the HDD blank. Connect the necessary power cable. To connect power cable. Firstly, remove the...
Acer AT110 F2 Service Guide - Page 66
... in the DIMM sockets properly, then reboot the system. Memory module. Main board. Enter BIOS Setup and load default settings. Reload software from Recovery CD. Diskette/IDE drive connection/cables Diskette/IDE disk drives See "Undetermined Problems". Main board
System works but fails to enter power saving mode when the Power Management Mode is set to Enabled. Blinking cursor only; system does not...
Acer AT110 F2 Service Guide - Page 67
.... Speaker power/connection/cable. CD/DVD-ROM drive.
CD/DVD-ROM drive can play audio CD but no sound output.
1. 2. 3. 4.
Video and Monitor Video memory test failed. Video adapter failed. 1. 2. 3. 1. 2. 3. 4. Remove all non-factory-installed cards. Load default settings (if screen is readable). Main board. Monitor signal connection/cable. Monitor Video adapter card Main board
Display problem...
Acer AT110 F2 Service Guide - Page 68
...serial ports problems. Serial or parallel port loop-back test failed. 1. 2. 3. Printing failed. 1. 2. 3. 4. Printer problems. 1. Make sure that the LPT# or COM# you test is the same as the setting in BIOS Setup. Loop-back. Main board. Ensure the printer driver is properly installed. Refer to the printer service manual. Printer. Printer cable. Main board. Refer to the service manual for the printer...
Acer AT110 F2 Service Guide - Page 69
... available
DXE Beep Codes
# of Beeps 1 4 5 5 6 7 8 Description Invalid password Some of the Architectural Protocols are not available No Console Output Devices are found No Console Input Devices are found Flash update is failed Reset protocol is not available Platform PCI resource requirements cannot be met
BIOS Recovery Instruction
AMI has an embedded recovery technique. In the event that the...
Acer AT110 F2 Service Guide - Page 72
... memory speed Memory initialization error. SPD reading has failed Memory initialization error. Invalid memory size or memory modules do not match. Memory initialization error. No usable memory detected Unspecified memory initialization error. Memory not installed Invalid CPU type or Speed CPU mismatch CPU self test failed or possible CPU cache error CPU micro-code is not found or micro-code update...
Acer AT110 F2 Service Guide - Page 73
... recovery capsule 0xFB - 0xFF Reserved for future AMI error codes
DXE Phase
Status Code 0x60 0x61 0x62 0x63 0x64 0x65 0x66 0x67 0x68 0x69 0x6A 0x6B 0x6C 0x6D 0x6E 0x6F 0x70 0x71 0x72 0x73 0x74 0x75 0x76 0x77 0x78 0x79 Description DXE Core is started NVRAM initialization Installation of the South Bridge Runtime Services CPU...
Acer AT110 F2 Service Guide - Page 74
... SCSI Detect SCSI Enable Setup Verifying Password Start of Setup Reserved for ASL (see ASL Status Codes section below) Setup Input Wait Reserved for ASL (see ASL Status Codes section below) Ready To Boot event Legacy Boot event Exit Boot Services event Runtime Set Virtual Address MAP Begin Runtime Set Virtual Address MAP End Legacy Option ROM Initialization System Reset USB hot plug PCI bus...