Dell Intel PRO Family of Adapters driver and firmware
Drivers and firmware downloads for this Dell item
Related Dell Intel PRO Family of Adapters Manual Pages
Download the free PDF manual for Dell Intel PRO Family of Adapters and other Dell manuals at ManualOwl.com
Intel EtherExpress Pro/10 PCI LAN Adapter User Guide - Page 3
.... 7. Restart the computer when prompted.
Windows NT 4.0
1. After installing the adapter in the computer, turn on the system. 2. Insert the Windows NT CD into the CD-ROM drive. 3. Click Start, point to Settings, and click Control Panel. 4. Double-click the Network icon. 5. Click Add.
A list of adapters appears.
6. Click Intel EtherExpress PRO/10+ PCI Adapter and click OK.
The Intel drivers and the...
Intel EtherExpress Pro/10 PCI LAN Adapter User Guide - Page 4
...of each line that loads a driver.
2. Insert the Intel configuration and drivers diskette into a diskette drive, change to that drive, and type setup at the MS-DOS prompt. 3. If you have more than one adapter installed, an adapter selection menu appears. Select the adapter you want by ethernet address. 4. Select Automatic Setup from the Main menu and follow the instructions on the screen. 5. Select...
Intel EtherExpress Pro/10 PCI LAN Adapter User Guide - Page 5
..., see Installing Multiple Adapters.
3. Click Change. 4. From the Adapter Setup window, click the menu for Network Speed. 5. Click the menu for Duplex Mode and click Full. 6. Click OK, and click OK to reboot.
Novell NetWare In autoexec.bat, load e100b.lan and add FORCEDUPLEX=2. For more information, refer to the readme files on the Intel configuration and drivers diskette. Insert...
Intel EtherExpress Pro/10 PCI LAN Adapter User Guide - Page 9
Installing Multiple Adapters: Intel EtherExpress Pro/10+ PCI LAN Adapter
Overview | Novell® NetWare® | Microsoft® Windows® 95 and NT®
Overview The adapter's 12-digit hexadecimal ethernet address (also called the node address or the MAC address) is labeled near the edge of the adapter. The PCI slot number may not correspond with the physical connector in your system.
Novell...
Intel EtherExpress Pro/10 PCI LAN Adapter User Guide - Page 11
Tech Notes: Intel EtherExpress Pro/10+ PCI LAN Adapter
Cabling Software Configuration Installing Multiple Adapters Duplex Mode Troubleshooting
Intel EtherExpress Pro/10 PCI LAN Adapter User Guide - Page 14
... BIOS PCI bus setting and make sure that it is set to Busmaster.
l Reserve interrupts (IRQs) and/or memory addresses for ISA adapters - This prevents PCI cards from trying to use the same settings ISA cards are using. Check your PCI BIOS Setup program; there may be IRQ options such as Enable for ISN, Reserved for ISA, or Disable for PCI.
l Enable the PCI slot - In some PCI computers...
Intel EtherExpress Pro/10 PCI LAN Adapter User Guide - Page 15
... the hub and network are operating and drivers are loaded.
l Make sure that you are using the correct drivers. l Make sure that the hub port and adapter have the same duplex setting. l Test the adapter by running the Intel PROSet utility in Windows 95 or NT or by running the Setup utility on the Intel configuration and drivers diskette in
Windows 3.x or MS-DOS...
Intel EtherExpress Pro/10 PCI LAN Adapter User Guide - Page 16
reason.
l The network driver files may be corrupt or deleted. Delete and reinstall the drivers. l Try a different adapter.