Samsung RF28JBEDBSG driver and firmware
Related Samsung RF28JBEDBSG Manual Pages
Download the free PDF manual for Samsung RF28JBEDBSG and other Samsung manuals at ManualOwl.com
User Manual - Page 3
....
• When moving the refrigerator, be careful not to roll over or damage the power cord.
• This refrigerator must be properly located and installed in accordance with the instructions in this manual before you use it.
• Connect the power plug in the proper position with the cord hanging down.
- If you connect the...
User Manual - Page 4
...a grounding adapter is used, make sure the receptacle box is fully grounded.
• Plug the power plug into the wall socket firmly. Do not use a damaged power plug, damaged power cord, ...appliance to stand for 2 hours before loading foods after installation and turning on.
• We strongly recommend you have a qualified technician or service company install the refrigerator.
- Failing to do so...
User Manual - Page 8
Saving Energy Tips
- Install the appliance in a cool, dry room with adequate ventilation. Ensure that it is not exposed to direct ...is open, the less frost build-up you'll have in the freezer.
- It is recommended to install the refrigerator with clearance to the back and sides. This will help reduce power consumption and keep your energy bills lower.
DA68-02952B-04.indb 8
English - 8
2016. 3. 30...
User Manual - Page 9
setting up
Setting up your French Door Refrigerator
GETTING READY TO INSTALL THE REFRIGERATOR
Congratulations on your purchase of the Samsung...refrigerator easily if it needs maintenance or service. • Do not install the refrigerator in locations where the ...power consumption. If your refrigerator has an ice maker, allow extra space at the back for the water line connections. When you install...
User Manual - Page 10
...blade screw driver(-)
Control Lever
FLOORING
For proper installation, you ...support a fully loaded refrigerator. To protect the finish of the flooring, cut a large section of the cardboard carton and place it under the refrigerator where you are working. When moving a refrigerator, you need to pull and push it straight forwards or back. Do not wiggle it from side to side.
WARNING
Disconnect power...
User Manual - Page 11
setting up
WARNING
Disassembling the refrigerator doors
Be careful not to drop and scratch ... line ( 3 ) while pressing the marked part ( 4 ) of the water line coupler.
Required Tools (Not provided)
You need the following tools to complete the installation of your refrigerator:
( 2 )
( 3 ) ( 4 )
Philips screwdriver(+)
Flat-blade screwdriver(-)
Socket wrench (13/32") (10 mm)
3. Pull and remove...
User Manual - Page 14
...CAUTION
Make sure that you mount the freezer basket in the right position when removing / installing the freezer door. Failing to do so may result in the door not opening or ... and counterclockwise to raise it.)
DA68-02952B-04.indb 14
flat-blade screwdriver (-)
Control Lever
CAUTION
Both control levers must be touching the floor to avoid possible personal injury or property damage because...
User Manual - Page 15
setting up
MAKING MINOR ADJUSTMENTS TO THE DOORS
Remember, a leveled refrigerator is necessary for getting the doors perfectly ...have connected the water line, make sure the water storage tank inside the refrigerator is properly filled. To do this, press the water dispenser lever until the water runs from the water outlet.
Water line installation kits are available at extra cost from your dealer. ...
User Manual - Page 16
... to complete this connection. You may find these items sold as a kit at your local hardware store.
2. Locate the nearest cold water drinking line and install the pipe clamp and shut off valve.
Cold water line Pipe clamp
Use Copper Tubing
• ¼" copper tubing • ¼" compression nut
(1pc) •...
User Manual - Page 17
... in an appropriate location with reasonable clearance between it and the wall. Refer to installation instructions in this manual.
2. Once the refrigerator is plugged in, make sure the interior light comes on when you open the doors.
3. Set the Temperature control to the coldest temperature and wait for an hour. The freezer will get slightly...
User Manual - Page 19
...set the Fridge to your desired
temperature. -- To turn the Power Cool function on
and off.
1) To set the Fridge temperature, press the Fridge button. You can set the temperature between 44 °F (7 °C) and 34 °F (1 °C).
2) Power... Control Lock Function Touch and hold this button for 3 seconds to lock the display, ...or close the door. After you install the new water filter, reset the...
User Manual - Page 21
... filter has
the SAMSUNG logo on the box and on the
water filter.
( 3 )
3. Insert the new filter into the filter case ( 4 ).
Removing any residual matter inside the water supply line after installing the water filter.
( 4 )
4. Push the filter, and then turn it clockwise until it locks. • If you have trouble inserting the...
User Manual - Page 24
...
• Replace the ice bucket.
If There is a Power Failure
If a power failure occurs, ice cubes may melt then freeze together when the power comes back on, causing the dispenser to be out of ... the ice bucket to the refrigerator.
Ice Making
To fill the ice bucket to maximum capacity after installation, follow these steps:
1. Allow your refrigerator to operate and cool down for 24 hours (or ...
User Manual - Page 29
... vertically ( 2 ). Pull the shelf out.
To re-install - Tilt the front of the shelf up and guide the shelf hooks into the slots at a desired height. Then lower the front of the shelf so that the hooks can drop into the slots.
( 1 )
2. Flip the Multi Supporter to position ( 1 ) to
prevent items from falling...
User Manual - Page 30
...length bars, push the lower part of each bar inward to unlock. See the pictures for details.
To re-install • Insert the drawer into the frame rails and push
back into place. • Slide the bin ... to your body with both hands.
4. Turn over the drawer to remove the metal cooling plate.
To re-install the Flex Zone - Open the Flex door to full extension. Tilt the front of the Flex Zone up, ...
User Manual - Page 31
... bin and lift it out to remove. To re-install the freezer drawer - Place the bin into the rail assembly.
( 1 )
1. Refer to page 12 for disassembly instructions. 2. Open the cap cover rail with a flat-...door is opened more than its auto close range, it will remain open. You must close it manually.
REMOVING THE FREEZER ACCESSORIES
1. Freezer Room Guard
CAUTION
You can scratch the side of the bin ...
User Manual - Page 35
...8226; Check if the power plug is properly connected. • Check if the set temperature on the digital display is warmer than the freezer or fridge
inner temperature. If it is, set the freezer or fridge to...off valve opened? • Did you manually stop the ice making function? • Check if the filter is properly installed. If it is not properly installed, the ice making
function may not work...
User Manual - Page 36
... temperature is too low?
Try selecting a warmer setting on the Digital display. • Is the Child Lock on? • Check if the filter is properly installed.
If it is not properly installed, the water dispenser may not work.
•...See the explanation of the Energy Saver button in "Using the Control Panel" on page 18.)
DA68-02952B-04.indb 36
English - 36
2016. 3. 30. �� 1:33
User Manual - Page 37
..., supplies, accessories, applications, installations, repairs, external plumbing and leaks, external wiring, circuit breakers, fuses or connectors not supplied and authorized by Samsung, or which damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions, cleaning, maintenance and...
User Manual - Page 38
If your refrigerator needs service
Do not hesitate to call any Samsung Authorized Service Center nearby giving them your name, address and telephone number when your product is not functioning properly.
Warranty Information (CANADA)
Limited Warranty for Original Purchaser This Samsung product is warranted by Samsung Electronics Canada Inc. (hereafter referred to as SECA) against manufacturing ...